No products in the cart.
Camera Mounts & Clamps
Showing all 28 results
-
Camera Mounts & Clamps
Joby Flash Clamp and Locking Arm – JB01312-BWW
- The removable flash shoe features a 1/4″-20 thread for use on tripods or other support systems
- The sliding locking arm can be attached to either end of the clamp and locks the system in place
- Fits most shoe-mount flash units and LED light panels as well as radio triggers
SKU: JB01312-BWW -
Camera Mounts & Clamps
Joby GripTight ONE Mount Black – JB01490-0WW
- Universal smartphone compatibility, with or without a case
- Quick, in-and-out access to the phone via spring-loaded grip
- The portable design folds flat to fit perfectly in your pocket
- Rubber pads securely hold the phone in place at any angle
- Durable construction to survive everyday wear and tear
SKU: JB01490-0WW -
Camera Mounts & Clamps
Joby Vertical L Bracket Vert – JB01684-BWW
- Switch easily between landscape and portrait shooting.
- Utilizes the popular 3K Plate mount from the GorillaPod® 3K Kit.
- Integrated cold shoe mounts to allow for additional light or mic.
- Bubble level on horizontal and vertical sides to align your shot.
- ¼-20” mount on the vertical side to allow for use with any tripod.
SKU: JB01684-BWW -
Camera Mounts & Clamps
SmallRig Articulating Arm with Dual Ball Heads (1/4”-20 Screw) – 2070B
- It is made up of double ball heads with 1/4″ screws and a ball head clamp.
- It could attach a cage with 1/4″-20 threaded holes, like Cage 1661, or a top plate with 1/4″-20 threaded holes, such as Top Plate 1853/1974/2032 on the one end, and it could also attach a monitor with 1/4″-20 threaded hole on the other end.
- The monitor mounted on it could be adjusted in different positions and angles via both the ball head and ball head clamp.
- A single wingnut is applied to lock the double ball head tight directly, thumb screws on both ends are utilized to lock the devices manually and a spare hex spanner is ready to lock it tighter.
- Its max load is 1.5kg.
SKU: 2070B -
Camera Mounts & Clamps
SmallRig Camera Cage for Blackmagic Design Pocket Cinema Camera 4K & 6K – 2203B
-24%
Camera Mounts & ClampsSmallRig Camera Cage for Blackmagic Design Pocket Cinema Camera 4K & 6K – 2203B
- A dedicated full cage.
- Multiple mounting points (NATO rails, 1/4″-20 and 3/8″-16 threaded holes, ARRI locating holes and cold shoe) for accessories.
- Form-fitting design with unobstructed battery & SD card access.
- Securely locked by 1/4’’-20 screws on the top and bottom, with additional locating pins and rubber pads on the base plate preventing wiggles.
- Compatible with SmallRig Mount for Samsung T5 SSD, HDMI & SSD cable clamp, metabones adapter support and other accessories.
SKU: 2203B -
Camera Mounts & Clamps
SmallRig Full Camera Cage for Panasonic LUMIX GH6 – 3784
- An All-in-one form-fitting full cage protects the camera.
- Various mounting points: 1/4”-20 threaded hole, ARRI 3/8″ -16 locating hole, cold shoe, NATO rail, for the handle, microphone, LED light, monitor, etc.
- Anti-Twist two points locking design.
- Built-in Arca-Swiss quick-release plate enables tripod photography.
- Built-in magnetic spanner for easy access.
SKU: 3784 -
Camera Mounts & Clamps
SmallRig Full Camera Cage for Sony Alpha 7R V/Alpha 7 IV/Alpha 7 S III/Alpha 1/Alpha 7R IV – 3667B
-26%
Camera Mounts & ClampsSmallRig Full Camera Cage for Sony Alpha 7R V/Alpha 7 IV/Alpha 7 S III/Alpha 1/Alpha 7R IV – 3667B
- One-piece full cage protects camera
- A hinged armat the battery door fits camera curve and enhances grip experience
- Multiple mounting points: 1/4″-20 threaded holes, ARRI 3/8″ -16 locating holes, cold shoe mounts, NATO rail and QD socket support handles, microphones, LED lights, monitors, etc.
- Triple-point locking: fixes camera via one bottom locating pin, one 1/4″-20 screw and the one M2.5 screw on the left side
- Arca-Swissquick release plate on the bottom for quick switching between tripod, stabilizer (DJI RS 2 / RSC 2 / RS 3 / RS 3 Pro) and handheld shooting
SKU: 3667B -
Camera Mounts & Clamps
SmallRig Magic Arm with Double Ball Heads (Arri locating Pins and 1/4 – 2115C
-13%
Camera Mounts & ClampsSmallRig Magic Arm with Double Ball Heads (Arri locating Pins and 1/4 – 2115C
- Ballhead with Arri locating pins could attach a camera cage or monitor cage with Arri locating points.
- Ballhead with a 1/4″ screw could be used to attach the camera cage or monitor directly.
SKU: 2115C -
Camera Mounts & Clamps
SmallRig Master Kit for BMPCC 6K Pro / 6K G2 – 3582
- Provides top handle and side handle solutions, suitable for individual photography.
- Quick-release design improves shooting efficiency.
- Compatible with lens support, matte box, follow focus, and other accessories.
- Protects camera, screen, and cables.
SKU: 3582 -
-
Camera Mounts & Clamps
SmallRig NP-F Battery Adapter Plate Lite for BMPCC 4K & 6K – 3093
- The plate fits Sony NP-F type batteries to provide greater battery life for BMPCC 4K & 6K.
- It provides different output ports, including a 12V DC output port and a 7.4V DC output port.
- LED indicator for low battery warning.
- Rubber pads on the bottom for a more stable installation.
- Two Charging Cables – LP-E6 Dummy Battery Cable and a DC to 2 Pin LEMO Cable.
SKU: 3093 -
Camera Mounts & Clamps
SmallRig T5/T7 SSD Mount for BMPCC 6K PRO – 3272
- Supports Samsung T5/T7 SSD and works with the BMPCC 6K PRO cage 3270.
- Slide-in cold shoe for quick assembly and disassembly.
- Comes with a USB-C cable clamp to prevent accidental disconnection during shooting.
- All-round rubber pads to prevent scratching.
SKU: 3272 -
Camera Mounts & Clamps
SmallRig Universal Holder for External SSD – BSH2343
- 1Fits Samsung T5 SSD，Angelbird SSD2go PKT, Glyph Atom SSD, SanDisk 1T SSD, G-Technology G-DRIVE Mobile SSD and more;
- Spring-loaded clamp holds the SSD securely;
- Mounts to the camera rig by the cold shoe or 1/4″ -20 screws;
- A USB-C cable clamp is included;
- Soft rubber pads inside prevent scratches.
SKU: BSH2343 -
Camera Mounts & Clamps
SmallRig V Mount Battery Adapter Plate (Basic Version) with Crab-Shaped Clamp – 3497
-16%
Camera Mounts & ClampsSmallRig V Mount Battery Adapter Plate (Basic Version) with Crab-Shaped Clamp – 3497
- Standard V mount fits most V mount batteries.
- Two D-Tap output ports and DC output ports.
- On/off switch for easy use.
- Super clamp mount suits rod diameter from 15mm to 30mm.
- Multiple built-in 1/4”-20 thread holes for accessory attachment.
SKU: 3497 -
Camera Mounts & Clamps
SmallRig V Mount Battery Adapter Plate (Basic Version) with Extension Arm – 3499
-14%
Camera Mounts & ClampsSmallRig V Mount Battery Adapter Plate (Basic Version) with Extension Arm – 3499
- Standard V mount fits most V mount batteries.
- Dual D-Tap output ports and DC output ports.
- On/off switch for easy use.
- Dual rod clamp suits 15mm rail support system.
- An adjustable extension arm can quickly reposition the battery adapter plate.
- Multiple built-in 1/4”-20 thread holes for accessory attachment.
SKU: 3499 -
Camera Mounts & Clamps
SmallRig V Mount Battery Adapter Plate with Adjustable Arm – 3204
- The plate utilizing a standard V mount fits most V mount batteries to provide greater battery life for your camera rig.
- The plate provides different output ports, including an 8V DC output port, two 12V DC output ports, and a 14.8V D-Tap output port.
- The plate provides a 5V/2A USB output port to power a phone or a wireless video transmitter via a V mount battery.
- It comes with a dual 15mm rod clamp to help mount the plate to your 15mm LWS rod system.
- It features an adjustable arm for quick adjustment of the V mount battery position.
SKU: 3204 -
Camera Mounts & Clamps
SmallRig V Mount Battery Adapter Plate with Crab-Shaped Clamp – 3202
- The plate utilizing a standard V mount fits most V mount batteries to provide greater battery life for your camera rig.
- The plate provides different output ports, including an 8V DC output port, two 12V DC output ports, and a 14.8V D-Tap output port.
- The plate provides a 5V/2A USB output port to power a phone or a wireless video transmitter via a V-mount battery.
- It comes with a crab-shaped clamp that fits rod diameters from 15mm to 30mm to help mount a V-mount battery to a tripod, a light stand, or a handheld ring for gimbals.
- It features multiple 1/4”-20 thread holes on the back, top, and bottom to attach a dual rod clamp, a magic arm, or other accessories.
SKU: 3202 -
Camera Mounts & Clamps
SmallRig V Mount Battery Adapter Plate with Dual 15mm Rod Clamp – 3203
- The plate utilizing a standard V mount fits most V mount batteries to provide greater battery life for your camera rig.
- The plate provides different output ports, including an 8V DC output port, two 12V DC output ports, and a 14.8V D-Tap output port.
- The plate provides a 5V/2A USB output port to power a phone or a wireless video transmitter via a V-mount battery.
- It comes with a dual 15mm rod clamp to help mount the plate to your 15mm LWS rod system.
- It features multiple 1/4”-20 thread holes on the back, top, and bottom to attach a dual rod clamp, a magic arm, or other accessories.
SKU: 3203 -
Camera Mounts & Clamps
SmallRig Wooden NATO Side Handle – 2187B
- Fits any cage with NATO rails on both sides.
- Quickly publish your settings without tools
- Mounting holes and cold shoe on top of the handle for attachment connection.
- Built-in Allen key, you can change the direction of the handle and adjust the height.
- The one-piece aluminum inner and wooden handle outer layer provide comfortable and lightweight handheld shooting.
SKU: 2187B -
Camera Mounts & Clamps
SmallRig Wooden Universal Side Handle – HSN2093C
- Ergonomic Wooden Side Handle for Camera Cage.
- Can Be Configured for the Right or Left Hand.
- 1/4″-20 & 3/8”-16 & Cold Shoe Accessory Mounts.
- Adjusts up & down with Sliding Connector.
- Integrated Hex Spanner for Direction Changing and Height Adjusting.
- Lightweight and Durable.
SKU: HSN2093C
