The 4K Over IP Extender system allows users to extend a 4K video source such as a PC or PVR through a standard Gigabit IP network letting the user control it from the remote side through the extended USB interfaces. This receiver unit can be connected to a transmitter unit (No. 38266 – not included) to create a standard point-to-point control system with a maximum distance of 100m (393ft). The transmitter can also be connected to many receivers, allowing a single device to be controlled from different consoles at the receiver end or creating a Video Wall installation via a dedicated Gigabit Ethernet (supporting 8kB Jumbo frames) switch on the same private network. Besides the HDMI embedded audio signal, this unit also manages 2 additional audio channels (1 x Line out audio from the source side and 1 for microphone connected on the remote side) and a SPDIF optical port on the receiver unit to connect a digital audio amplifier or device.
This HDMI Over IP extender system includes a convenient bidirectional IR (20-60Khz) repeating system to allow the extension of the remote control signals. This device is a typical solution for security system management (PVR management or control rooms) or remote server administration (though the KVM control system) as well as AV signals over IP extension for distributed monitoring of industrial facilities. Another main application for this system is big Video Wall installation (up to 16×16 screens) widely used for digital signage and retail stores.
Interfaces Standard: HDMI 2.0, USB (HID) and USB 2.0
Supported Bandwidth: 10.2Gbps
Maximum Distance: 100m (393.7ft) (Point to Point)
Maximum Resolution: 3840×2160 60Hz 4:2:0 8bit (VGA Max 1920×1200 60Hz)
HDCP Support: HDCP 1.4 and 2.2
Supported Audio: Audio supported over HDMI signal and 2 analog bidirectional (1 x Audio and 1 x Microphone)
Separate Audio Ports: 2 x 3.5mm (Female), 1 x SPDIF Optical
Transmission Protocol: IP
Transmission Medium: Cat.6
Laser Class (only for Fibre): –
Wavelength (only for Fibre): –
Video Codec: Motion JPEG
Latency: 33ms Approx.
Special Features: Video Wall Function (up to 16×16 screens), VGA Input & Output support (max. resolution 1920×1440), Bidirectional IR and Serial RS232 Extension
Connectors
Transmitter KVM Interfaces: –
Transmitter Extension Port: –
Receiver Consolle Interface: HDMI (Female), 2 x VGA (Female), 2 x USB 2.0 Type A (Female), 2 x USB HID Type A (Female), 2 x 3.5mm Audio (Female)
There are no reviews yet.